LED Lighting Accessories
Single Door Feeder Pillars & Fuse Cut Outs
Our LED Lighting Accessories
Gemma Lighting carry a wide range of accessories to complete our luminaire offerings.
We carry photocells, CMS cells, dummy cells, defender kits, fuse cut-outs, spill shields, bollard guards and column guards.
Here we have listed the most common accessories, but if you need something which is not depicted, please contact our sales team.
Fuse Cut Outs
Double pole Street Lighting Cut Out with provisions for one LST fuses on the output side.
- Fuse carrier with cam operated lever to provide low extraction force.
- Durable, robust thermoplastic construction with good anti-tracking properties.
- Electroplated pillar type terminals.
- Downward oriented lantern cables to provide drip arrest.
- Outgoing terminals accept up to 16mm2 stranded copper conductors.
- Loop In/Out cabling up to 25mm2 solid/stranded copper conductors.
- Insulated gland plate with 2 x 25mm cable entries via PVC conical grommets.
- Pre-loaded cross head corrosion resistant fixing screws.
- Fuse carrier lockable with padlock having 4.5mm diameter hasp.
|2 x 25mm2
|2 x 35mm2 / 1 x 25mm2
General Lighting Accessories
|Photocell 70 Lux Node
|70 Lux photocell for NEMA socket (default option for luminaires)
|Photocell 35 Lux Node
|35 Lux photocell for NEMA socket
|CMS Cell Node
|CMS cell for NEMA/CMS socket (call to specify)
|NEMA Shorting Cap
|Dummy cell blanking plate for NEMA socket
|Bird deterrent spikes
Glare Shields & Spill Shields
Our LED bollards and LED post-tops have spill shields readily available, but are pre-installed by our factory, so please refer to specific luminaire page for this option.
Our LED street lights and selection of wall lights can have spill shields retrofitted, so these are listed here.
Spill shields, also known as glare shields, are also a requirement for being compliant with dark sky recommendations.
|Conquest S Front Shield
|Spill Shield to control light from Front of Conquest 20W-70W
|Conquest S Rear Shield
|Spill Shield to control light from Rear of Conquest 20W-70W
|Conquest S Left Shield
|Spill Shield to control light from Left of Conquest 20W-70W
|Conquest S Right Shield
|Spill Shield to control light from Right of Conquest 20W-70W
|Conquest L Front Shield
|Spill Shield to control light from Front of Conquest 80W-200W
|Conquest L Rear Shield
|Spill Shield to control light from Rear of Conquest 80W-200W
|Conquest L Left Shield
|Spill Shield to control light from Left of Conquest 80W-200W
|Conquest L Right Shield
|Spill Shield to control light from Right of Conquest 80W-200W
|General Column Shield
|Spill Shield to control light from Rear of 60-89mm Column
|General Outreach Shield
|Spill Shield to control light from Rear of 34-60mm Outreach
|Richmond Rear Shield
|Spill Shield to control light from Rear of Richmond
|Mayfair Rear Shield
|Spill Shield to control light from Rear of Mayfair
|Hurricane Shield Visor
|Spill Shield to control light from Hurricane
Bollard Guards & Column Guards
Gemma Lighting stock a selection of bollard guards and column guards to protect your luminaire from accidental damage.
We have a heavy duty column guard for our standard bollards, small bollards and columns.
When luminaire guards are purchased from Gemma Lighting, we can support you in choosing the guard for your project and offer any painted RAL colour finish.
|Bollard Guard (Small)
|Guard for small bollards, 400mm above ground, 300mm root
|Bollard Guard (Standard)
|Guard for standard bollards, 700mm above ground, 300mm root
|Guard for columns, 1000mm above ground, 300mm root
You may also like…